Siemens SINUMERIK 828D Programming Manual page 490

Tables
16.1 Instructions
Operation Meaning
PON Punching ON
PONS Punching ON in interpolation cycle
POS Position axis
POSA Position axis across block boundary
POSM Position magazine
POSP Positioning in sections (oscillating)
POSRANGE Determine whether the currently
interpolated position setpoint of an axis
is located in a window at a predefined
reference position
POT Square
(arithmetic function)
PR Per revolution
PREPRO Identify subprograms with preparation
PRESETON Set actual values for programmed axes
PRIO Keyword for setting the priority for
interrupt processing
PROC First operation in a program
PTP Point-to-point motion
PTPG0 Point-to-point motion only with G0,
otherwise CP
PUNCHACC Travel-dependent acceleration for
nibbling
PUTFTOC Tool fine offset for parallel dressing
PUTFTOCF Tool fine offset dependent on a function
for parallel dressing defined with
FCTDEF
PW B spline, point weight
490
W Description see
1) 2)
PGAsl
m
PGAsl
m
PGsl
Traversing positioning axes (POS, POSA, POSP, FA,
WAITP, WAITMC) (Page 120)
PGsl
Traversing positioning axes (POS, POSA, POSP, FA,
WAITP, WAITMC) (Page 120)
FBW
PGsl
Traversing positioning axes (POS, POSA, POSP, FA,
WAITP, WAITMC) (Page 120)
PGAsl
PGAsl
PGsl
Approach and retraction (G140 to G143, G147, G148,
G247, G248, G347, G348, G340, G341, DISR, DISCL,
FAD, PM, PR) (Page 310)
PGAsl
PGAsl
PGAsl
PGAsl
PGAsl
m
PGAsl
m
PGAsl
PGAsl
PGAsl
PGAsl
s
Programming Manual, 07/2010, 6FC5398-1BP40-0BA0
Fundamentals