Siemens SINUMERIK 828D Programming Manual page 466

Tables
16.1 Instructions
Operation Meaning
CTABSEG Number of curve segments already used
in the memory
CTABSEGID Number of the curve segments used by
the curve table with number n
CTABSEV Returns the final value of the following
axis of a segment of the curve table
CTABSSV Returns the initial value of the following
axis of a segment of the curve table
CTABTEP Returns the value of the leading axis at
curve table end
CTABTEV Returns the value of the the following
axis at curve table end
CTABTMAX Returns the maximum value of the
following axis of the curve table
CTABTMIN Returns the minimum value of the
following axis of the curve table
CTABTSP Returns the value of the leading axis at
curve table start
CTABTSV Returns the value of the following axis at
curve table start
CTABUNLOCK Revoke delete and overwrite lock
CTOL Contour tolerance for compressor
functions, orientation smoothing and
smoothing types
CTRANS Zero offset for multiple axes
CUT2D 2D tool offset
3)
CUT2DF 2D tool offset The tool offset is applied
relative to the current frame (inclined
plane).
CUT3DC 3D tool offset circumferential milling
CUT3DCC 3D tool offset circumferential milling with
limitation surfaces
CUT3DCCD 3D tool offset circumferential milling with
limitation surfaces with differential tool
CUT3DF 3D tool offset face milling
CUT3DFF 3D tool offset face milling with constant
tool orientation dependent on active
frame
466
W Description see
1) 2)
PGAsl
PGAsl
PGAsl
PGAsl
PGAsl
PGAsl
PGAsl
PGAsl
PGAsl
PGAsl
PGAsl
PGAsl
PGAsl
PGsl
m
2D tool compensation (CUT2D, CUT2DF) (Page 329)
PGsl
m
2D tool compensation (CUT2D, CUT2DF) (Page 329)
PGAsl
m
PGAsl
m
PGAsl
m
PGAsl
m
PGAsl
m
Programming Manual, 07/2010, 6FC5398-1BP40-0BA0
Fundamentals