Change In The Tool Offset Data - Siemens SINUMERIK 828D Programming Manual

5.7

Change in the tool offset data

Effectiveness
A change in the tool offset data takes effect the next time the T or D number is programmed.
Set tool offset data to be active immediately
The following machine data can be used to specify that entered tool offset data takes effect
immediately:
MD9440 $MM_ACTIVATE_SEL_USER
If MD9440 is set, tool offsets resulting from changes in tool offset data during the part
program stop, are applied when the part program is continued.
Fundamentals
Programming Manual, 07/2010, 6FC5398-1BP40-0BA0
DANGER
Tool offsets
5.7 Change in the tool offset data
85