Siemens SINUMERIK 828D Programming Manual page 469

Operation Meaning
DISABLE Interrupt OFF
DISC Transition circle overshoot tool radius
compensation
DISCL Clearance between the end point of the
fast infeed motion and the machining
plane
DISPLOF Suppress current block display
DISPLON Revoke suppression of the current block
display
DISPR Path differential for repositioning
DISR Distance for repositioning
DITE Thread run-out path
DITS Thread run-in path
DIV Integer division
DL Select location-dependent additive tool
offset (DL, total set-up offset)
DO Keyword for synchronized action,
triggers action when condition is fulfilled
DRFOF Deactivation of handwheel offsets (DRF)
DRIVE Velocity-dependent path acceleration
DRIVEA Activate bent acceleration characteristic
curve for the programmed axes
DYNFINISH Dynamic response for smooth finishing
DYNNORM Standard dynamic response
Fundamentals
Programming Manual, 07/2010, 6FC5398-1BP40-0BA0
W Description see
1) 2)
PGAsl
PGsl
m
Compensation at the outside corners (G450, G451,
DISC) (Page 306)
PGsl
Approach and retraction (G140 to G143, G147, G148,
G247, G248, G347, G348, G340, G341, DISR, DISCL,
FAD, PM, PR) (Page 310)
PGAsl
PGAsl
PGAsl
s
PGAsl
s
PGsl
m
Programmable run-in and run-out paths (DITS, DITE)
(Page 265)
PGsl
m
Programmable run-in and run-out paths (DITS, DITE)
(Page 265)
PGAsl
PGAsl
m
PGAsl
PGsl
m
Deselecting overlaid movements (DRFOF, CORROF)
(Page 389)
PGsl
m
Acceleration mode (BRISK, BRISKA, SOFT, SOFTA,
DRIVE, DRIVEA) (Page 422)
PGsl
Acceleration mode (BRISK, BRISKA, SOFT, SOFTA,
DRIVE, DRIVEA) (Page 422)
PGsl
m
Activation of technology-specific dynamic values
(DYNNORM, DYNPOS, DYNROUGH, DYNSEMIFIN,
DYNFINISH) (Page 427)
PGsl
m
Activation of technology-specific dynamic values
(DYNNORM, DYNPOS, DYNROUGH, DYNSEMIFIN,
DYNFINISH) (Page 427)
Tables
16.1 Instructions
469