Geometry Settings - Siemens SINUMERIK 828D Programming Manual

Geometry settings

8.3 Dimensions
Note
For information on the input of the circle center point coordinates I and J, see Section
"Circular interpolation".
Example 2: Turning
Program code
N5 T1 D1 S2000 M3
N10 G0 G90 X11 Z1
N20 G1 Z-15 F0.2
N30 G3 X11 Z-27 I-8 K-6
N40 G1 Z-40
N50 M30
Note
For information on the input of the circle center point coordinates I and J, see Section
"Circular interpolation".
174
Comment
; Loading of tool T1, spindle on with clockwise
direction of rotation.
; Absolute dimension input, in rapid
traverse to position XZ.
; Linear interpolation, feed of the tool.
; Counterclockwise circular interpolation, circle end
point in absolute dimensions, circle center point
in incremental dimensions.
; Traverse
; End of block
Programming Manual, 07/2010, 6FC5398-1BP40-0BA0
Fundamentals