Siemens SINUMERIK 828D Programming Manual page 161

Meaning
G54
G505
G500
G53
G153
SUPA
References:
See Section "Coordinate transformations (frames)" for the programmable zero offset.
Note
The basic setting at the start of the program, e.g.
Fundamentals
Programming Manual, 07/2010, 6FC5398-1BP40-0BA0
8.1 Settable work offset (G54 to G57, G505 to G599, G53, G500, SUPA, G153)
to : Call of the 1st to 4th settable zero offset (ZO)
G57
to : Call of the 5th to 99th settable zero offset
G599
: Deactivation of the current settable zero offset
G500
(default setting; contains no
offset, rotation, mirroring or
scaling)
G500
:
G53
offset non-modally.
:
G153
basic frame.
:
SUPA
• Handwheel offsets (DRF)
• Overlaid movements
• External zero offset
• PRESET offset
=zero frame:
not equal to 0:
suppresses the settable work offset and the programmable work
has the same effect as
has the same effect as
G54
Deactivation of the settable zero
offset until the next call, activation of
the entire basic frame
($P_ACTBFRAME).
Activation of the first settable zero
offset ($P_UIFR[0]) and activation of
the entire basic frame
($P_ACTBFRAME) or possibly a
modified basic frame is activated.
and also suppresses the entire
G53
and also suppresses:
G153
or , can be set via machine data.
G500
Geometry settings
161