Siemens SINUMERIK 828D Programming Manual page 559

WAITM # INT: Marker
numbers
0-9
WAITMC # INT: Marker
numbers
0-9
WAITP AXIS: Axis
identifier
WAITS INT: Spindle
number
RET
GET # AXIS
GETD# AXIS
RELEASE # AXIS
PUTFTOC # REAL:
Offset value
PUTFTOCF INT:
# No. of
function
The number
used here
must be
specified in
FCTDEF.
Fundamentals
Programming Manual, 07/2010, 6FC5398-1BP40-0BA0
INT:
Channel
numbers
1 - 10
or STRING:
Channel
name
$MC_CHAN
_NAME
INT:
Channel
numbers
1 - 10
or STRING:
Channel
name
$MC_CHAN
_NAME
AXIS: Axis AXIS: Axis
identifier identifier
INT: Spindle INT: Spindle
number number
AXIS AXIS
AXIS AXIS
AXIS AXIS
INT: INT:
Parameter Channel
number number or
STRING:
Channel
name
$MC_CHAN
_NAME
VAR REAL: INT:
Reference Parameter
value *) number
AXIS: Axis AXIS: AXIS:
identifier Axis Axis
identi- identi-
fier fier
INT: Spindle INT:
number Spin-
dle
num-
ber
AXIS AXIS AXIS
AXIS AXIS AXIS
AXIS AXIS AXIS
INT: Spindle
number
INT: INT:
Channel Spin-
numbers dle
1 - 10 num-
or STRING: ber
Channel
name
$MC_CHAN
_NAME
16.5 Predefined subroutine calls
Wait: Wait for a marker to be
reached in other channels. The
program waits until the WAITM
with the relevant marker has
been reached in the other
channel. The number of the
own channel can also be
specified.
Wait: Waits conditionally for a
marker to be reached in other
channels. The program waits
until the WAITMC with the
relevant marker has been
reached in the other channel.
Exact stop only if the other
channels have not yet reached
the marker.
Wait for positioning axis: Wait
for positioning axes to reach
their programmed end point.
Wait for positioning spindle:
Wait until programmed spindles
previously programmed with
SPOSA reach their
programmed end point.
End of subroutine with no
function output to the PLC.
Assign machine axis
Assign machine axis directly
Release machine axis
Put fine tool correction: Fine
tool compensation
Put fine tool correction function
dependent:
Change online tool
compensation according to a
function defined with FCTDEF
(max. 3rd degree polynomial).
Tables
559