Siemens SINUMERIK 840D Series Diagnostics Manual page 6

Preface
SINUMERIK 840D
powerline
SINUMERIK 810D
powerline
Information about
software versions
Export version
Sorting
VI
From 09.2001
• SINUMERIK 840D powerline and
• SINUMERIK 840DE powerline
will be available with improved performance. The following hardware description contains
a list of the available powerline modules:
References: /PHD/ SINUMERIK 840D Configuration Manual
From 12.2001
• SINUMERIK 810D powerline and
• SINUMERIK 810DE powerline
will be available with improved performance. The following hardware description contains
a list of the available powerline modules:
References: /PHC/ SINUMERIK 810D Configuration Manual
The software versions specified in the documentation are valid for the SINUMERIK 840D
and SINUMERIK 810D controls. The software versions are related to one another; see
the table:
SINUMERIK
840D
6.3 (09.01) corresponds to
5.3 (04.00) corresponds to
3.7 (03.97) corresponds to
The following functions are not included in the export version:
Function
Machining package five axes
Handling transformation package (5 axes)
Multiple-axes interpolation (> 4 axes)
Helical interpolation 2D+6
Synchronous actions step 2
Measurement level 2
Adaptive control
Continuous dressing
Using the compile cycles (OEM)
Multidimensional sag compensation
The alarms are sorted by ascending alarm number in each section. There are gaps in the
sequence.
SINUMERIK
810D
-
3.3 (04.00)
1.7 (03.97)
SINUMERIK 840D/840Di/810D Diagnostics Guide (DA) – 11.02 Edition
SINUMERIK SINUMERIK
810D 840i
powerline
6.1 (12.01) 2.1 (07.01)
- 1.1 (07.00)
-
810E 840DE
- -
- -
- -
- -
- O1)
- O1)
- O1)
- O1)
- -
- O1)
 Siemens AG, 2002. All rights reserved
11.02
-