Siemens SINUMERIK 840D Series Diagnostics Manual page 428

1 Alarms
Remedy:
Program Continuation:
101200
Definitions:
Reactions:
Remedy:
Program Continuation:
101201
Definitions:
Reactions:
Remedy:
Program Continuation:
101202
Parameters:
Definitions:
Reactions:
Remedy:
Program Continuation:
101203
Definitions:
Reactions:
Remedy:
Program Continuation:
101204
Definitions:
Reactions:
Remedy:
Program Continuation:
101205
Definitions:
Reactions:
Remedy:
Program Continuation:
1-428
-
Internal
Safety-Integrated data copied
The SI data copying function was successful.
- -
-
Internal
Safety-Integrated data confirmed
The SI data confirmation function was successful.
- -
-
Internal
SI data is copied from axis %1 to drive %2
%1 = Axis name
%2 = Drive number
This message is output during the SI data copying function.
- -
-
Internal
SI data not completely copied
An error occurred during the SI data copying function; this caused the SI data to be cop-
ied incompletely or not at all.
- -
-
Internal
SI data not confirmed
The SI data confirmation function was not executed because an error occurred during the
processing.
- -
-
Internal
Drive data changed? -> Don't forget to save the boot files!
When exiting the drive machine data images, the operator is reminded to save the boot
files so that drive machine data that may have been changed is not lost.
- -
-
Internal
SINUMERIK 840D/840Di/810D Diagnostics Guide (DA) – 11.02 Edition
 Siemens AG, 2002. All rights reserved
11.02