Siemens SINUMERIK 840D Series Diagnostics Manual page 130

1 Alarms
Remedy:
Program Continuation:
12200
Parameters:
Definitions:
Reactions:
Remedy:
Program Continuation:
12210
Parameters:
Definitions:
Reactions:
Remedy:
Program Continuation:
12220
Parameters:
Definitions:
Reactions:
1-130
Press the NC Stop key and select the function "Correction block" with the soft key PRO-
GRAM CORRECT. The correction pointer positions on the incorrect block.
Correct the array definition, with multi-dimensional arrays define a second 2-dimensional
array if necessary and operate it with the same field index.
Clear alarm with NC START or RESET key and continue the program.
Channel %1 block %2 symbol %3 cannot be created
%1 = Channel number
%2 = Block number, label
%3 = Symbol in the source block
The symbol to be created with the DEF instruction cannot be created because:
• it has already been defined (e.g. as variable or function)
• the internal memory location is no longer sufficient (e.g. with large arrays)
- Alarm display.
- Interface signals are set.
- Correction block
Make the following checks:
• Check with the text editor whether the name to be allocated in the active program cycle
(main program and called subprograms) has already been used.
• Estimate the memory requirements for the symbols already defined and reduce these if
necessary by using fewer global and more local variables.
Clear alarm with NC START or RESET key and continue the program.
Channel %1 block %2 string %3 too long
%1 = Channel number
%2 = Block number, label
%3 = String in the source block
• In the definition of a variable of type STRING, it has been attempted to initialize more
than 100 characters.
• In an allocation, it has been found that the string does not fit in the given variable.
- Alarm display.
- Interface signals are set.
- Correction block
Press the NC Stop key and select the function "Correction block" with the soft key PRO-
GRAM CORRECT. The correction pointer positions on the incorrect block.
• Select shorter string or divide up the character string into 2 strings
• Define larger string variable
Clear alarm with NC START or RESET key and continue the program.
Channel %1 block %2 binary constant %3 in string too long
%1 = Channel number
%2 = Block number, label
%3 = Binary constant
When initializing or allocating the value of a variable of type STRING more than 8 bits
have been found as binary constant.
DEF STRING[8] OTTO = "ABC'H55''B000011111'DEF"
- Alarm display.
- Interface signals are set.
- Correction block
SINUMERIK 840D/840Di/810D Diagnostics Guide (DA) – 11.02 Edition
 Siemens AG, 2002. All rights reserved
11.02