Photoreceptor Drum Assembly - Xerox 2510 Service Manual

REP 9.2 Photoreceptor Drum
I. Removethe right side cover, and the left
Replacement
Assembly
[parts List on PL 9.1
Removal
side cover.
CAUTION
2 - Remove the xerographic module (REP 9-11
STEP 1 8: Reinstall the /eft side of the drum
CAUTION
assembly first to avoid damaging the drum
ground bracket.
Cover the photoreceptor drum with a light
shield to prevent damage. 1 . (Figure 2 ) : Reinstall the photoreceptor
assembly.
(Figure 1): Remove the photoreceptor
2. The remainder of the replacement
is
the
drum assembly. reverse of the removal.
WARNING
Disconnect the power cord
3.
Figure 1. Remove the Photoreceptor Drum Assembly
A
INSTALL THE LEFT SIDE OF
MOVE THE
THE PHOTORECEPTOR
BEARING ASSEMBLY
Figure 2. Reinstalling the Photoreceptor Drum Assembly
REP 922