Xerox 2510 Service Manual page 352

TAG MATRIX
'
Figure 9. (2515) Tag Matrix
7. (Figure 10): Remove the platen and check
that the document lens is seated correctly
in the bottom slots.
8. Remove the plastic protective coating
from both sides of the platen.
9. Clean both sides of the platen with anti-
static cleaner and reinstall the platen.
Leave the cleaner with the customer.
10. Remove the xerographic module (REP 9.1).
ENSURE THAT THE
LENS I S IN THE
BOTTOM SLOTS
FROM THE FRONT OF THE
NOTE:
The copier is shipped with the
photoreceptor drum packed
separately. The photoreceptor drum
will be installed later i n the procedure.
11. (Figure 11): Cut and remove the cable tie.
I
COPIER
I
REAR VIEW
Figure 10. Removing the Platen and Checking
-
the Document Lens
CLEANING
BLADE
CABLE
TIE WEIGHT,
-
Figure 11. Cutting the Cable Tie
7/92
Installation
6-16 251012515