Xerox 2510 Service Manual page 379

TAG: 12
CLASS: N
USE: US0 AND RX
MANUFACTURING SERIAL NUMBERS:
USO: 64600461 3 AND UP
RX: 60J322206 AND UP
NAME AND PURPOSE:
FRAME MODIFICATION: TO REDUCE PHOTORECEPTOR
DAMAGE DURING SHIPPING AND HANDLING. THE FRAME
HAS BEEN MODIFIED AND A SEAL (35K1320) WAS ADDED
BETWEEN 'tl-1E FRAME AND ' 1 I.IE PI~10T01tECEPTOR.
I
KIT NUMBER: NONE
REFERENCE: PL 6.1
TAG: 13
CLASS:
R
USE: US0 AND RX
MANUFACTURING SERIAL NUMBERS:
USO: 64GOO57W AND UP
RX: 601322755 AND UP
NAME AND PURPOSE:
WEIGHTED MOTION SENSOR (130K16232):
MINIMIZES VARIATION IN THE REGISTRATION 01: COPIES.
KIT NUMBER: NONE
1
REFERENCE: PL 8.5
TAG: 14 TAG: 16
CLASS: R
CLASS: 0 (USO); 2 (RX)
USE: US0 AND RX
USE: US0 AND RX
MANUFACTURING SERIAL NUMBERS:
USO: 6460073 15 AND UP
RX: 601322984 AND UP
MANUFACTURING SERIAL NUMBERS:
USO: 64GOll535
RX: 60J329100
NAME AND PURPOSE:
NAME AND PURPOSE:
FUSER REPAIR KIT TO UPGRADE MACHINES TO IMPROVE
COPY FEED-OUT KIT TO ENHANCE POLYESTER FILM FEED
THE FUSING ON THE EDGES
OF
COPIES.
OUT AND REDUCES OIL DEPOSITS ON COPIES BY ADDING
WARNING: DO NOT USE ANY TAG 14 PARTS SEPARATELY
AN ANTI-STATIC RnU$ll QN
Tilt:
FRONT COVER AND
UNLESS
THE
MACHINE
HAS
BEEN UPGRADED TO TAG 14,
CIlANGlNG THE STRIPPER PINGERS.
THESE PARTS ARE NOT INTERCHANGEABLE ON PRE-TAG
14 MACHINES.
I KIT NUMBER: 606K280 (US0 AND RX)l
REFERENCE: NONE
KIT NUMBER: USO:600K6780
RX:600K6790
TAG: 17 NOT USED
I
REFERENCE: NONE
TAG: 15
TAG: 18 NOT USED
CLASS:
R
USE: US0 AND RX
TAG: 19 NOT USED
MANUFACTURING SERIAL NUMBERS:
TAG: 20 NOT USED
USO: 64G000820
RX: 601324000
NAME AND PURPOSE:
UPPER REAR COVER UPGRADE TO INSTALL MORE
RELIABLE FASTENERS ON THE UPPER REAR COVER.
KIT NUMBER: USO:600K6830
REFERENCE: PL 14.1
7/92
2510
6-41
Change Tag Index