REP 10.13 Motion Sensor
Replacement
I
Parts List on PL 8.5
Removal
CAUTION
After turning the Paper Transport back t o the
original position, ensure that the Cover, Fabric
Guide, and Pressure Plate are in place.
WARNING
isc connect the
power cord.
NOTE: Note the orientation
of
the motion
sensor when removing for proper
replacement.
1. Remove xerographic module (REP 9.1).
2. Remove media transport (REP 8.1).
3. Turn media transport over.
4. (Figure 1 ) : Remove motion sensor.
REMOVE
MOTION
SENSOR
Figure
1.
Remove
Motion
Sensor
7/92
251 01251 5
4-55
REP 10.1
$