12 Localized Deletions - Xerox 2510 Service Manual

CQ 12 Localized Deletions
(Continued)
Probable Cause Corrective Action
6. The fuser temperature is too high.
6.
7. Oil dispense assembly is contaminated.
7.
Check the Fuser Temperature (ADJ 10.1)
Replace the oil pads and wick (251 0 PL
10.4,2510 W l Tag 252 and 2515 PL 10.5).
8. Lens
is
not mountod correctly or light
8.
shield
is
damaged or missing,
9. Not enough developer material
developer housing.
10. The light leak discharges
photoreceptor drum.
1 1. Copier is not level.
12.
Developer bead carryover.
a. The light seal Is separated from lens (PL
6.1). Fix the seal with black electrical
tape or install the Light Leak Repair Kit
PL 6.1).
b. Ensure that the magncl nnd lens are
positioned correctly against frame,
c. Check for direct room light or sunlight
on the copier.
Replace developer material (REP 9.9) and
perform the Electrostatic Series (2510 ADJ
9.2; 251 5 ADJ 9.3).
the
10. Ensure that the covers are not damaged
and that they are seated correctly. Allow
the photoreceptor drum t o rest before
trying t o
make
copies.
11. Level the copier.
12. Refer t o the CQ 7 Developer Bead
Carryover RAP.
13. The fans are not functioning, or the ozone
filter i s contaminated or blocked.
13. Go t o the 1.3 Cooling Fan RAP in Section 2.
Also replace the ozone filters (PL 9.3).
(Continued)
8/96
CQ 12 Localized Deletions
3-60
251012515