Xerox 2510 Service Manual page 367

7. (Figure 8): ~over'the openings of the dry
ink plus cartridge with adhesive tape, and
remove the dry ink plus cartridge.
'
8.
Place a drop cloth or a large sheet of paper
on the floor.
9. (Figure 9.2510): Remove the developer
module (REP 9.5).
A
REMOVE
SCREW
REMOVE
COVER
THE
Figure 7 (2515). Removing the Left Side Cover
Figure
8.
Removing the Dry Ink Plus Cartridge
10. (2510) Dump the developer material.
11. (2510) Clean the developer housing with a
vacuum cleaner.
A
PLACE DROP
CLOTH ON
FLOOR ROTATE GEAR
COUNTERCLOCKWISE
B'
TlJRN DEVELOPER
MODULE OVER
Figure
9. (2510)
Dumping the Developer
Material
Removal