Oiler Wick Priming - Xerox 2510 Service Manual

Oiler Wick Priming (2510 Wl i a g 252,
1
2515)
This procedure adds additional oil t o the wick in
order t o prevent a fuser roll offsetting copy
quality problem.
1. Remove the Oil Dispense Assembly REP
(1 0.5).
2. Remove the Oil Dispense Roll Assembly REP
(10.10).
3.
(Figure 1): Prime
the
wick.
4.
Reinstall the Oil Dispense Roll Assembly.
5. Perform the Initialization of the Fuser Roll
procedure if it war not done
previous to
doing
this
procedure.
Note: If the Initialization o f the
Fuser
Roll
procedure
is
going to
be
done after completing
this procedure, do not install the Oil Dispense
Assembly.
6. Install the Oil Dispense Assembly.
A
ADD 4 CC OF OIL T
THE WICK OVER THE
LENGTI-I 0 1 : THE
OILER ASSEMBLY
ADD 4 CC OF OIL TO
THE WICK OVERTHE
LENGTH OF THE
f
\
OlLER ASSEMBLY
B
TURN THE
ASSEMBLY
OlLER
OVER
7/92
Oiler Wick Priming (251 5,251 0 W / Tag 252)
6.6