(Continued)
10. Ensure that the cleaner blade weight
moves freely and when fully tranistioned,
9. (Figure 8): Ensure that the cleaner blade
does not touch the frame. Ensure that
removes
the
stearate dust from
the
there
Is
clearance between the bracket
photoreceptor drum.
and solenoid plunger.
-
I
1 1. Check the solenoid adjustment ADJ 9.1.
12. Reinstall the xerographic module.
COMPRESS SOLENOID
PLUNGER
PLACE A SCREWDRIVER AS
SHOWN TO PROVIDE A THREE
POINT SUPPORT
Figure
8.
Remove the Stearate from the Photoreceptor Drum