Rep 9.2 Photoreceptor Drum Assembly - Xerox 3001 Service Manual

REP 9.2 PHOTORECEPTOR DRUM
2. REMOVE THE SEPARATORGUIDES,THE
REPLACEMENT
ASSEMBLY
RIGHT SIDE COVER, AND THE LEFT SIDE
COVER.
STEP 1 B: Reinstall the left side of the
drum assembly first to avoid damaging
PARTS LIST ON PL 9.1
3. REMOVE THE XEROGRAPHIC MODULE (REP the drum ground bracket.
REMOVAL
9.1)
1. (FIGURE 2): REINSTALLTHE
Cover the Photoreceptor Drum with a PHOTORECEPTOR ASSEMBLY
1. WARNING: DISCONNECT THE POWER
light shield to prevent damage.
2. THE REMAINDER OF THE REPLACEMENT IS
(FIGURE 1): REMOVE THE
THE REVERSE OF THE REMOVAL.
PHOTORECEPTOR DRUM ASSEMBLY.
CORD.
REMOVE (2)
ONE EACH END
DRUM
A INSTALLTHE LEFT SIDE OF THE
MOVE THE BEARING
PHOTORECEPTOR ASSEMBLY
Figure 2. Reinstall the Photoreceptor Drum
Figure
1.
Remove the Photoreceptor Drum Assembly
Assem bly
12/98
3001 4-23
REP 9.2