Registration - Xerox 2510 Service Manual

ADJ 8.1 Registration
Purpose
The purpose is to adjust the timing of the
copier for the correct registration of the copy
material and the document image.
Align the lead edge reference line on the copy
with the Reg. Ref. 0 reference line on the test
pattern. The lead edge of the copy must be
within the black box on the test pattern
82E5020
(Figure
1).
Adjustment
Make ten copies and check the
registration. If
it
is out of specification
proceed on to next steps.
Enter Diagnostics Test 7. Press Start.
Scroll up or down depending which
direction the registration needs to be
moved.
Press
Start
l o enler the new setting and
make copies.
Adjust as necessary until the registration i s
within specification.
TEST PATTERN
,
EEEEEEEE ~ E E E E E E
-
d
EEEEEEEE
I I
-
r
EEEEEEEEEPEE
B
I . I ~
I:DC;E ILINK (IN
'r111:
COPY MUST BE WITHIN THE
BLACK BOX AREA OF THE
TEST PATTERN.
COPY
f
ALIGN REG, REF. 0 MARK
WI'1'1.l 'llltr: LEAD EDGE
MARK.
Reg. ~ e f /
FIGURE 1. Check the Regisration
7/92
ADJ 8.1
4-58 251012515