Cleaner Blade - Xerox 2510 Service Manual

REP 9.4 Cleaner Blade
I
Parts List on PL 9.2
Removal
WARNING
Disconnect
the
power cord
1. Remove photoreceptor drum assembly
(REP 9.2).
2. (Figure 1): Remove transition gear and
weight.
NOTE: STEP 3 A: The cleaner blade
assembly is spring loaded. Use care
when removing the transition gear.
3. (Figure 2): Remove the cleaner blade
assembly.
A B
MOVE, I{EMOVE' CIXANEII
BLADE ASSEMO1.Y
Figure 2. Remove the Cleaner Blade
Assembly
NOTE: 2510 WIO Tag 10, see the change t a g
index
and
order necessary parts to
upgrade the cleaner blade assembly.
4.
25
10 WtTag 10 and
25
15, continue this
procedure.
5.
(Figure
3,
Figure4): Remove
the
cleaner
blade.
REMOVE TI4E
CLEANER ULADE
Figure 3. (2510 W/O Tag
25)
Remove the Cleaner Blade
REP 9.4