Xerox 2510 Service Manual page 27

XEROGRAPHIC MODULE
(Continued)
INTERVAL
71
(WIO
Tag 22
TASK
Replace the Oil Pad
Replace the Oil Pads
Lubrication
Replace oil pads and
wick
REASON
Dry pads result in fuser roll wear, Offsetting.
Media Handling problems
Dry pads result in fuser roll wear, Offsetting,
Mcdia I4ondling problems
Noise from various areas o f the copier.
Copy quality defects.
Oil pads are dry. Wick i s contaminated
TASK ENABLER
- -
-
-
-
-
-
Ensure that the pads touch i n the center t o prevent oil from
seeping ovrt the ends
(2510
Only) Install Tag
22
Ensure that the pads touch i n the center t o prevent oil from
sccping ovrl thc cndr.
See O F 1 Isolation Procedure for Mechanical Noise RAP,
Section 2, for the parts t o be lubricated and the specific
lubrication t o use.
Replace oil pads.
Replace wick.
(2510 WlTag 252,2515): Perform
the
Initialization
Procedure for the fuser roll.
(Continued)
7/92
251012515 1.7
Xerographic Module Maintenance Procedures