2510 Developer Module - Xerox 2510 Service Manual

REP9.5 2510 Developer Module
1
Parts List on PL 9.4
WARNING
Disconnect the power cord.
I
Removal
2. Remove the left
and
right side covers
and
the upper rear cover.
NOTE: Before removing the developer
module, ensure that there is a clear
3.
(Fiaure 1): Remove the developer module.
.
.-
area to place the assembly.
D
REMOVE DEVELOPER
n n n n 1 1 1 e
I
DISCONNECT
MOVE
WARNING
DO NOT LIFT AND MOVE WHILE
GRASPING THE SUPPORT TUBES
Ynr
SDS
M
Figure 1. Remove the Developer Module
REP 9.5