REP 8.1 Media Transport
Module
2. Remove the left
and
right side covers,
and
the upper and lower rear covers.
Parts List on PL 8.1
Removal
3. (Figure 1 ) : Remove the media transport.
1. Remove xerographic module
Replacement
(REP 9.1).
NOTE:
Step G:
When replacing the media
transport, ensure that the pin is
NOTE:
Before rcrnoving the media Iransport
engaged in the slot.
assembly, ensure that there
is
a clean
area to place the assembly.
AND REMOVE
OVE MEDIA TRANSPORT
1
I
TO LEFT, UNTIL MAIN
A
DISCONNECT TRANSFERIDETACK HIGH VOLTAGE LEADS
DRIVE GEAR AND PIN
CLEAR THE FRAME
L
Figure 1. Removing the Mrdia Transport
7/92
25101251s
4-7
REP 8!1