Xerox 2510 Service Manual page 361

32. (2510, Figure 25): Set the darkness lever to
the fourth notch from the bottom.
33. Clean both sides of the platen with anti-
static cleaner and reinstall the platen. Leave
the cleaner with the customer.
NOTE:
Install the document handler so that
the labels on top can be read from the
front.
REAR VIEW
Figure 25 (2510 only). Setting the Darkness
Lever
34. (Figure 26): Install the upper rear cover.
TIGHTEN (2)
114 TURN
pe
lC
Figure 26. Installing the Upper Rear Cover
NOTE:
Prior to installation rotate the transport
platen and observe that the platen is
installed correctly or has not been
moved during shipping. If out o f
position install the correct position.
35. (Figure 27): lnstall the document handler.
u
Figure
27.
Installing the Document Handler