Xerox 2510 Service Manual page 371

21. (2510, Figure 17; 251 5, Figure
18):
I
Reinstall the right side cover.
Figure 17. (2510) Reinstalling the Right End
Cover
MOVE THE
HANDLES OUT
TIGHTEN ( 2 ) ~
TURN
Figure 18. (2515) Reinstalling the Right
Side Cover
22.
(Figure
19):
Reinstall the packing
I
material.
REINSTALL FOAM BLOCKS
Flgurc
19. Reinstalling the Foam Blocks
23. After the copier has been prepared to this
point, contact a rigger.
The rigger will repack the copier, using a
repack kit supplied by the rigger.
If the copier is only to be moved a short
distance, the rigger will decide whether
or not to move the copier without the
use of a repack kit.
24. If
the copier i s to be moved internally or
only a short distance and if the copier must
be up ended ensure that the dry ink
cartridge and oiler assemble are removed
.
7/92
251012515 6-35
Removal