Xerox 2510 Service Manual page 184

CQ 15 Residual Image Probable Cause Corrective Action
1. Photoreceptor drum
is
not
being cleaned correctly. Remove the xerographic module. Check the following:
Cleaner blade solenoid adjustment (ADJ
9.1).
The cleaner blade weight moves freely and when fully
transistioned, does not touch the frame. Ensure that there i s
clearance.
The cleaner blade assembly transitions across the photoreceptor
drum.
No wires are interfering with the cleaner blade weight.
Cleaner auger and belt.
Remove the photoreceptor drum and check the following for damage or
contamination:
Cleaner
blade
seal assembly (REP 9.4).
Clannar
blndo
(REP 9 4 ,
Cleaner blade retainers (REP
9.4).
Drum seal.
Reinstall the xerographic module. Make a copy. If the cleaning problem is
not corrected replace the cleaner blade (REP 9.4).
2. CheckIAdjust the Electrostatic Series (2510 ADJ 9.2; 2515 ADJ 9.3).
3. If the residual image problem happens again within a short period of
time, replace the photoreceptor
(REP 9.3)
and the cleaning blade (REP
9.4).
CQ 15 Residual lmage