Xerox 2510 Service Manual page 190

CQ 18 Skips Probable Cause Corrective Action
1. Document was disturbed as i t moved 1. Check the platen for damage. Clean the
across the platen. platen with Anti-Static Fluid. Ensure that
the document is not moved or disturbed a s
it feeds through the document transport.
2.
Document transport drive belt i s slipping
2.
Check that the lower document feed rolls
on the drive pulleys. and document idler rollers are not
binding. If the rolls are binding, first clean
the plastic bearings with
a
dry cloth and
polish the roll shafts with emery paper.
If
the problem
still
occurs, replace the rolls
(PL 5.1) and bearings.
3. Contaminated or damaged document 3. Replace the damaged or contaminatec
transport drive belt and pulleys. parts (PL 5.1).
4.
Media transport not seated correctly.
4.
Ensure that the media transport is seated
correctly and that
it
i s latched correctly.
7/92
C Q 18 Skips
3-74 2510/2515