Xerox 2510 Service Manual page 368

I
NOTE: STEP
13 C:
Ensure that all the
15. Reinstall the ~ i c k off baffle.
12. (251 5) Remove the pickoff baffle and store
it i n a safe place t o avoid damaging it.
CAUTION
Do not turn the developer module to the
vertical position. This may cause
developer to get into the -dry ink
cartridge clutch at the end o f the
Developer Module.
developer
is
dumped.
(
2515, Figure 10): Dump the developer
material.
Completely vacuum the developer housing.
CAUTION
STEP 16 A: The pick o f f baffle must be
taped before replacing the dry ink
cartridge to ensure that the pick o f f
baffle does not move causing damage.
16. (Figure 11): 'Tape the pick off baffle.
-I€
DROP CLOTH
TURN THE
DEVELOPER
MODULE OVER
1
Figure 10. (251 5) Dump the Developer ~ a h d
Figure I I . (251 5) Tape the Pick Off Baffle
Removal