Show Ip Access-Group; Show Expert Access-Group - D-Link DES-7200 Cli Reference Manual

DES-7200 CLI Reference Guide
Platform
description
54.2.2

show ip access-group

Use this command to show the IP ACL configured on the interface.
show ip access-group[interface <interface>]
Parameter
description
Command
mode
Usage
guidelines
Examples
Related
commands
Platform
description
54.2.3

show expert access-group

Use this command to show the configured expert ACL of the interface.
show expert access-group[interface idx]
Parameter
description
The software version must be R10.0 and higher.
Parameter
<interface>
Privileged mode
Show the IP ACL configured of the interface. If no interface is
specified, the associated IP ACLs of all the interfaces will be shown.
DES-7210# show ip access-group interface gigabitethernet 0/1
ip access-group aaa in
Applied On interface GigabitEthernet 0/1.
Command Description
ip access-list Define the IP ACL.
The software version must be R10.0 and higher.
Parameter
<interface>
Chapter 54 ACL Configuration Commands
Description
Interface ID
Description
Interface ID
54-35