Show Mac Access-Group - D-Link DES-7200 Cli Reference Manual

Chapter 54 ACL Configuration Commands
Command
mode
Usage
guidelines
Examples
Related
commands
Platform
description
54.2.4

show mac access-group

Use this command to show the configured MAC ACL of the interface.
show mac access-group[interface <interface>]
Parameter
description
Command
mode
Usage
guidelines
Examples
Related
54-36
Privileged mode.
Show the expert ACL configured on the interface. If no interface is
specified, the associated expert ACLs of all the interfaces will be
shown.
DES-7210# show expert access-group interface gigabitethernet 0/2
expert access-group ee in
Applied On interface GigabitEthernet 0/2.
Command
expert access-list
The software version must be R10.0 and higher.
Parameter
<interface>
Privileged mode.
Show the MAC ACL associated with the interface. If no interface is
specified, the associated MAC ACLs of all associated interfaces will
be shown.
DES-7210# show mac access-group interface gigabitethernet 0/3
mac access-group mm in
Applied On interface GigabitEthernet 0/3.
Command Description
DES-7200 CLI Reference Guide
Description
Define the extended expert ACL.
Description
Interface ID