Assembly And Installation - Suzuki Baleno Manual

Inspection
1) Check evaporator fins for blockage. If found clogged, use com-
pressed air to clean the fins.
NOTE:
Do not use water for cleaning of evaporator.
2) Check inlet and outlet fittings for crack or scratch. Repair them
as required.

Assembly and Installation

1) Reverse removal sequence to install thermistor.
2) Enable air bag system. Refer to "Enabling Air Bag System" in
Section 9J.
3) Evacuate and charge system according to previously described
procedure.
E. EXPANSION VALVE
Inspection
Refer to "Troubleshooting Procedure Using Manifold Gauge Set"
in this section.
1. Evaporator
2. Expansion bulb
Removal and Installation
Refer to previous section EVAPORATOR (COOLING UNIT).
AIR CONDITIONING (OPTIONAL) 1B-21