Suzuki Baleno Manual page 246

Stabilizer joint (if equipped)
1) Check for smooth rotation.
2) Inspect ball stud for damage.
3) Inspect dust cover for damage.
NOTE:
Stabilizer joint cannot be disassembled.
If there is any damage to either, stabilizer joint assembly must
be replaced as a complete unit.
1. Stabilizer joint
SUSPENSION KNUCKLE
D Inspect for cracks, deformation or damage.
D Inspect bushing for damage, wear or breakage.
If any faulty condition is found, replace.
CONTROL ROD
D Inspect for cracks, deformation or damage.
D Inspect bushing for wear and breakage.
If any faulty condition is found, replace.
TRAILING ROD
D Inspect for cracks, deformation or damage.
D Inspect bushing for wear and breakage.
If any faulty condition is found, replace.
SUSPENSION FRAME
D Inspect for cracks, deformation or damage.
If any faulty condition is found, replace.
REAR SUSPENSION (2WD VEHICLE) 3E-23