Manual Release Procedure For Shift Lock Solenoid - Suzuki Baleno Manual

When selector lever is shifted to any range other than P
or when selector lever knob button is pushed at P.
1. Ignition key
2. Ignition switch 4. Release shaft
3. Interlock cable 5. Lock lever
1. Selector lever (in "P")
2. Shift lock solenoid 4. Lock plate
3. Detent pin 5. Detent plate
1. Selector lever (in "P")
2. Shift lock solenoid 4. Lock plate
3. Detent pin 5. Detent plate
1. Cover
2. Screw
3. Lock plate
4. Detent pin
VIEW A
5. Button
SHIFT LOCK SOLENOID
When the select lever is in "P" range, the ignition key position is
"ON" and depressing the brake pedal cause the electric current to
flow to the solenoid. As the lock plate is drawn toward the solenoid
in this state, it frees the detent pin, which then allows the select le-
ver to be shifted from "P" range to any other position.
Even when the select lever is in "P" range, if the ignition key posi-
tion is "LOCK" or "ACC" or the brake pedal is not depressed, the
electric current does not flow to the solenoid. In this state, the lock
plate is pushed away from the solenoid by spring force and it ob-
structs the detent pin movement. Thus the select lever button does
not work even when pressed and the select lever shift is prevented.
MANUAL RELEASE PROCEDURE FOR SHIFT LOCK
SOLENOID
Shift lock solenoid can be manually released by the following pro-
cedure.
1) Remove access hole cover by unfastening screw.
2) Turn ignition key to "ACC" position and move lock plate toward
front side of vehicle by using screw driver or the like until detent
pin becomes free.
3) In this state, selector lever can be moved to any range or posi-
tion regardless of brake pedal operation.
AUTOMATIC TRANSMISSION 7B1-17