Suzuki Baleno Manual page 529

Condition
Gears slipping out of D Worn shift fork shaft
mesh D Worn shift fork or synchronizer sleeve
D Weak or damaged locating springs
D Worn bearings on input shaft or counter-
D Worn chamfered tooth on sleeve and gear
Hard shifting D Inadequate lubricant
D Improper clutch pedal free travel
D Distorted or broken clutch disc
D Damaged clutch pressure plate
D Worn synchronizer ring
D Worn chamfered tooth on sleeve or gear
D Worn gear shift control shaft joint bush
D Distorted shift shaft
Noise D Inadequate or insufficient lubricant
D Damaged or worn bearing(s)
D Damaged or worn gear(s)
D Damaged or worn synchronizer parts
D Maladjusted backlash between bevel pinion
D Improper tooth contact in the mesh be-
DIAGNOSIS
Possible Cause
shaft
and gear
tween bevel pinion and gear
MANUAL TRANSMISSION 7A2-7
Correction
Replace
Replace
Replace
Replace
Replace sleeve and gear
Replenish
Replace clutch arm or master cylinder
Replace
Replace clutch cover
Replace
Replace sleeve or gear
Replace
Replace
Replenish
Replace
Replace
Replace
Adjust as prescribed
Adjust or replace