1D-13 Engine Mechanical:
Engine Mountings Components
[A]: 4WD model
[B]: A/T model
[C]: M/T model
1. Engine right mounting
2. Engine right mounting bracket
Engine Assembly Removal and Installation
Removal
1) Relieve fuel pressure according to "Fuel Pressure
Relief Procedure in Section 1G".
2) Disconnect negative and positive cable at battery.
3. Engine left mounting
4. Engine left mounting bracket No.1
5. Engine left mounting bracket No.2
6. Engine rear mounting
7. Engine front torque bush
3) Remove engine hood after disconnecting windshield
S3RH0A1406018
washer hose.
4) Remove right and left side engine under covers.
5) Remove A/C compressor and/or P/S belt (if
equipped).
S3RH0A1406043
8. Mounting member
9. Suspension frame
: Tightening torque
I2RH0B140040-01