Suzuki Baleno Manual page 538

7A2-16 MANUAL TRANSMISSION
1. Transmission case bolt
2. Reverse shaft bolt
1. Input R bearing
2. Plate 3. Bolt
1. Input R bearing
1. Input shaft oil seal
2. Countershaft R bearing cup
MAIN SHAFT AND COUNTER SHAFT
1) For removal procedure, refer to Steps 3), 6) and 8) of Gear Shift-
er, Main Shaft and Counter Shaft in Section 7A (DISASSEM-
BLING UNIT).
2) Remove transmission case outside bolts and clutch housing
bolts.
3) For removal procedure, refer to Steps 10) and 12) to 16) of Gear
Shifter, Main Shaft and Counter Shaft in Section 7A (DISAS-
SEMBLING UNIT).
RIGHT CASE
1) Remove input R bearing stopper bolt and plate.
2) Remove input R bearing by using special tools.
Special Tool
(A): 09930-30104
(B): 09923-74510
3) Remove input shaft oil seal by using special tools (combination
of bearing remover and sliding shaft).
Special Tool
(A): 09930-30104
(B): 09923-74510
4) Also pull out countershaft R bearing cup by using bearing re-
mover 09941-64511 with sliding shaft 09930-30104.