Suzuki Baleno Manual page 860

7C1-4 CLUTCH (HYDRAULIC TYPE)
Condition
Slipping
Dragging clutch
Clutch vibration
Noisy clutch
Grabbing clutch
DIAGNOSIS
Possible cause
D Improper clutch pedal free travel.
D Worn or oily clutch disc facing.
D Warped disc, pressure plate or flywheel
surface.
D Weakened diaphragm spring.
D Master cylinder piston or seal cup not re-
turning.
D Improper clutch pedal free travel.
D Weakened diaphragm spring, or worn
spring tip.
D Rusted input shaft splines.
D Damaged or worn splines of transmission
input shaft.
D Excessively wobbly clutch disc.
D Clutch facings broken or dirty with oil.
D Fluid leakage.
D Glazed (glass-like) clutch facings.
D Clutch facings dirty with oil.
D Release bearing slides unsmoothly on in-
put shaft bearing retainer.
D Wobbly clutch disc, or poor facing contact.
D Weakened torsion springs in clutch disc.
D Clutch disc rivets loose.
D Distorted pressure plate or flywheel sur-
face.
D Weakened or loosened engine mounting
bolt or nut.
D Worn or broken release bearing.
D Input shaft front bearing worn down.
D Excessive rattle of clutch disc hub.
D Cracked clutch disc.
D Pressure plate and diaphragm spring rat-
tling.
D Clutch disc facings soaked with oil.
D Clutch disc facings excessively worn.
D Rivet heads showing out of facing.
D Weakened torsion springs.
Correction
Replace clutch arm or master cylinder.
Replace disc.
Replace disc, clutch cover or flywheel.
Replace clutch cover.
Repair master cylinder.
Replace clutch arm or master cylinder.
Replace clutch cover.
Lubricate.
Replace input shaft.
Replace disc.
Replace disc.
Repair or replace.
Repair or replace disc.
Replace disc.
Lubricate or replace input shaft bearing
retainer.
Replace disc.
Replace disc.
Replace disc.
Replace clutch cover or flywheel.
Retighten or replace mounting.
Replace release bearing.
Replace input shaft bearing.
Replace disc.
Replace disc.
Replace clutch cover.
Replace disc.
Replace disc.
Replace disc.
Replace disc.