Suzuki Baleno Manual page 587

CUSTOMER PROBLEM INSPECTION FORM (EXAMPLE)
User name:
Date of issue:
j Vehicle does not move (R, D, 2, L range)
j No upshift automatically (j 1st to 2nd j 2nd to 3rd j 2 range j D range)
j No downshift automatically (j 3rd to 2nd j 2nd to 1st j 2 range j D range)
j No gear change manually (j 1st $ 2nd j 2nd $ 3rd)
j Automatic shift point too high or too low
j Excessive gear change shock (1st / 2nd / 3rd / Reverse)
j No kickdown
j Transmission slipping in (1st / 2nd / 3rd / Reverse)
j Others
VEHICLE/ ENVIRONMENTAL CONDITION WHEN PROBLEM OCCURS
Weather j Fair j Cloudy j Rain j Snow j Always j Other
Temperature ( (
Frequency j Always j Sometimes (
condition
Road j Urban j Suburb j Highway j Mountainous j Uphill j Downhill
j Tarmacadam j Grave j Other
Engine & j Cold / j Warming up phase / j Warmed up
transmission transmission Engine speed ( Engine s eed (
condition Throttle opening (j Idle / j About
Vehicle j At stop / j During driving (j Constant speed j Accelerating j Decelerating)
condition condition j Right hand corner j Left hand corner j Vehicle speed ( j Right hand corner j Left hand corner j Vehicle s eed (
j Other
Malfunction j Blink j Always ON j Sometimes ON j Always OFF
indicator lamp j Good condition
Diagnostic First check: j No code j Malfunction code (
trouble code
Second check: j No code j Malfunction code (
NOTE:
The above form is a standard sample. It should be modified according to conditions characteristic of each
market.
Model:
Date Reg.
PROBLEM SYMPTOMS
Environmental Condition
_F / _C) j Hot j Warm j Cool j Cold j always )
Vehicle Condition
r / min) r / min)
y
VIN:
Date of problem:
times / day, month) j Only once j Under certain
%/ j full)
y
AUTOMATIC TRANSMISSION (3 A/T) 7B-17
Mileage:
y
km / h km / h Mile / h) Mile / h)
)
)