Siemens Sinamics S110 Function Manual page 98

Hide thumbs Also See for Sinamics S110:

Table of Contents

5.2 Diagnostics via STARTER

To start the ramp-function generator:

1. Set the requirements for starting the function generator:

2. Select the operating mode:

3. Set the signal shape:

4. Download the settings to the target device ("Download parameterization" button).

5. Start the function generator ("Start FctGen" button).

To stop the measuring function:

● "Stop FctGen" button

Parameterization

Select the "function generator" parameter screen via the following icon in the toolbar of the

STARTER commissioning tool:

– Activate the control panel:

Drive_1 → Commissioning → Control panel

– Switch on the drive:

Control board → Issue enable signals → Switch on

e.g. speed setpoint downstream of filter

e.g. square-wave

STARTER icon for "trace function/ramp-function generator"

Function Manual, 01/2011, 6SL3097-4AB10-0BP3

Function Manual

Show Quick Links

Table of Contents