Commissioning With Starter - Siemens Sinamics S110 Function Manual

Closed-loop control
● p2200 BI: Technology controller enable
● p2253[0...n] CI: Technology controller setpoint 1
● p2254 [0...n] CI: Technology controller setpoint 2
● p2255 Technology controller setpoint 1 scaling
● p2256 Technology controller setpoint 2 scaling
● p2257 Technology controller ramp-up time
● p2258 Technology controller ramp-down time
● p2261 Technology controller setpoint filter time constant
● p2263 Technology controller type
● p2264[0...n] CI: Technology controller actual value
● p2265 Technology controller actual value filter time constant
● p2280 Technology controller proportional gain
● p2285 Technology controller integral action time
● p2289[0...n] CI: Technology controller pre-control signal
● p2295 Technology controller output scaling
7.3.2.4

Commissioning with STARTER

The "technology controller" function module can be activated via the commissioning Wizard.
You can check the actual configuration in parameter r0108.16.
Dedicated screens are available for parameterization.
Function Manual
Function Manual, 01/2011, 6SL3097-4AB10-0BP3
Drive functions
7.3 Function modules
209