Transferring Pzd - Siemens Sinamics S110 Function Manual

9.5.2

Transferring PZD

Prerequisite
The communications interface must be set to USS protocol.
Defining the process data to be transferred
To define the process data (PZD) to be transferred, proceed as follows:
1. Select <drive> → Communication in STARTER.
Figure 9-47 USS: Defining the PZD receive direction
2. Define the process data (PZD) you want to receive on the Receive direction tab.
3. Define the process data (PZD) you want to send on the Send direction tab.
Function Manual
Function Manual, 01/2011, 6SL3097-4AB10-0BP3
Communication
9.5 Communication using USS
641