Transferring The Determined Device Configuration To Startdrive - Siemens SINAMICS S120 Getting Started

5.7 Alternatively: Creating a project with a device configuration derived from the hardware
Renaming the component
1. Select the components which are to be renamed.
2. Call the "Rename" shortcut menu.
3. Enter a new name for the component.
Connecting components in parallel
The parallel connection view supports you in the parallel connection of components.
1. Activate the "Parallel connection view" option.
The "Connect in parallel at" shortcut menu is now available (see Step 2).
2. The following options are available for connecting components in parallel:
– Drag and drop
– Shortcut menu:
Cancelling a parallel connection
You can cancel an existing parallel connection as follows:
1. Drag and drop components to the higher-level drive unit.
OR
2. Select a component connected in parallel and select the "Disconnect parallel connection"
shortcut menu.
5.7.2

Transferring the determined device configuration to Startdrive

Note
Overwriting existing data in the device configuration
If components already exist in the device configuration of the drive unit from which you
started discovery of the device configuration, they will be deleted or overwritten when data
are created by the automatic configuration.
Getting Started, 12/2018, 6SL3097-5AG30-0BP0
Drag the components that can be connected in parallel using drag and drop to
connect them in parallel.
Right-click the components to be connected in parallel. In the shortcut menu, the
"Connect in parallel at" menu item shows all the drive objects to which the selected
component can be connected in parallel.
The "All" item switches the selected power unit parallel to all connectable components.
Commissioning
111