Panasonic AFPX-C30R User Manual page 76

Installation with screws
Use M4 size screws for the installation
Reference: For the information on the installation dimensions,
<13.1.4 Dimension Diagram for Installation
Installation and removal of the expansion FP0 adapter/FP0 expansion unit
Attachment to DIN rail and removal from DIN rail
Can be simply attached to DIN rail.
Procedure of installation method
(1) Fit the upper hook of the unit onto the DIN rail.
(2) Without moving the upper hook, press on the lower hook to fit the
unit into position.
Procedure of removal method
(1) Insert a slotted screwdriver into the DIN rail attachment lever.
(2) Pull the attachment lever downwards.
(3) Lift up the unit and remove it from the rail.
Installation Using the Optional Mounting Plate
When using the slim type mounting plate (AFP0803) (for mounting FP0)
Use M4 size pan-head screws for attachment of the slim type mounting plate and install according to the
dimensions shown below.
Tighten the screws after joining all of the slim type mounting plate to be connected. Tighten the screws
at each of the four corners.
[Example] When two expansion units
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
The rest of the procedure is the same as that
for attaching the unit to the DIN rails.