Panasonic AFPX-C30R User Manual page 35

2.3.2 Transistor (Tr) Type (Common to NPN and PNP)
Transistor type (common to NPN and PNP)
Item
Insulation method
Rated input voltage
Operating voltage range
Rated input current
Input points per common
Min. on voltage/Min. on current
Max. off voltage/Max. off current
Input impedance
Response time
Operating mode indicator
EN61131-2 Applicable type
Note) this specification is applied when the rated input voltage is 24 V DC and the temperature is 25 °C.
Circuit diagram
[X0 to X3]
Limitations on number of simultaneous input on points
Reference: <2.5 Limitations on Number of Simultaneous Input/Output On Points>
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Optical coupler
24V DC
21.6 to 26.4V DC
Approx. 8 mA (for control units X0 to X3)
Approx. 4.7 mA (for control units X4 to X7)
Approx. 4.3 mA (from control unit X8)
8 points/common
(Either the positive or negative of the input power supply can be
connected to common terminal.)
19.2 V DC/6 mA (for control units X0 to X3)
19.2 V DC/3 mA (from control unit X4)
2.4V DC/1.3 mA (for control units X0 to X3)
2.4V DC/1 mA (from control unit X4)
Approx. 3 kΩ (for control units X0 to X3)
Approx. 5.1 kΩ (for control units X4 to X7)
Approx. 5.6 kΩ (from control unit X8 )
For control units X0 to X3:
135 µs or less: normal input
5 µs or less
For control units X4 to X7:
off→on
135 µs or less: normal input
50 µs or less
From control unit X8 (C30/C60 only) :
0.6 ms or less
on→off Same as above
LED display
TYPE3 (however, according to the above specifications)
Description
C14
16 points/common
Note)
: high-speed counter, pulse catch,
interrupt input settings
Note)
: high-speed counter, pulse catch,
interrupt input settings
[From X4]
X4 to X7 :R1=5.1kΩ
From X8 :R1=5.6kΩ
C30/C60
R2=3kΩ
R2=1kΩ