Panasonic AFPX-C30R User Manual page 227

PC(PLC) link communication setting
When the PC(PLC) link function has been selected on the FP-X, the baud rate is automatically 115200
bps. Set the baud rate in the COM1 port communication setting for the AFPX-COM5 to 115200 bps as
well.
Setting Ethernet communication environment of Communication cassette AFPX-COM5
The Configurator WD is used to set Ethernet communication environment of the AFPX-COM5.
Dialog box of Communication setting
Setting communication environment of FP-X
The programming tool FPWIN GR is used to set the baud rate or communication format of the COM1
port.
Select [Option] → [PLC Configuration] in the menu bar, and click [COM1 Port] tab.
Dialog box of PLC Configuration setting
No. Setting item
No.410 Unit No.
No.412 Communication mode
Do not use the same unit number for multiple FP-X units.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Setting item
Communication protocol
Baud rate
Communication mode
Send type
Destination port No.
Source port No.
Note1) Specify the same number for the
destination port No. and the source port No. for
the AFPX-COM5 to be used in the PC(PLC) link.
Default
1
PC link
Setting value
UDP
115200bps
General-purpose
communication
BROADCAST
1025 to 32767
0､1025 to 32767