Panasonic AFPX-C30R User Manual page 375

Setting to allow the access to the program by inputting a password
Note:
If the power supply of the PLC is turned on/off with the setting that the access is allowed, the setting will
be that the PLC is protected again.
How to cancel the password setting
Following two methods are available to cancel the password setting.
Unprotect
Force cancel
Releasing the protection of PLC (Programs are retained.)
Note) The protection cannot be released if the access is not allowed.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Description
Cancels the registered password to be specified.
Erases all programs and security information to
cancel the setting forcibly.
As the dialog box is shown, select as below.
Digit number:
Select "4 digits" or "8 digits".
Operation Mode:
Select "Access".
4 digits (or 8 digits) password:
Input a password to be set.
Click "Settings".
The setting has completed.
All programs are retained.
All programs are deleted.
(The upload protection setting is
also deleted.)
As the dialog box is shown, select as below.
Digit number:
Select "4 digits" or "8 digits".
Operation Mode:
Select "Unprotect".
4 digits (or 8 digits) password:
Input a password to be set.
Click "Settings".
Click [OK].
Program