Panasonic AFPX-C30R User Manual page 238

7.7.14 Initialization Procedure
Overview
• The Ethernet communication environment setting of the AFPX-COM5 can be initialized.
Initialization procedure
1. Turn on the switch at the back of the AFPX-COM5.
2. Install the AFPX-COM on the FP-X and turn on the power supply.
3. The ERR. LED of the AFPX-COM5 flashes every 5 seconds. (Initialization completes.)
4. Turn off the power supply of the FP-X. Remove the AFPX-COM5.
5. Turn off the switch at the back of the AFPX-COM5.
6. Install the AFPX-COM5 on the FP-X, and turn on the power supply.
Note) The Ethernet communication setting (including the IP address) cannot be changed when the
switch at the back of the AFPX-COM5 is on. Always turn it off after initialization.
Setting for initialization
IP address setting
Communication setting
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Item
Get IP address
Unit name
IP address
Subnet mask
Default gateway
Item
Communication protocol
Action mode
Baud rate (COM1)
Communication mode
Source port No.
Time out
Default
Manual
FPX_ET
192.168.1.5
255.255.255.0
192.168.1.1
Default
TCP
Server mode
9600 bps
Computer link
9094
0