Panasonic AFPX-C30R User Manual page 521

Num-
Name
ber
F235 16-bit binary
data → Gray
P235
code conversion
F236 32-bit binary
data → Gray
P236
code conversion
F237 16-bit gray code
→ binary data
P237
conversion
F238 32-bit gray code
→ binary data
P238
conversion
F240 Bit line to bit
P240 column
conversion
F241 Bit column to bit
P241 line conversion
Binary data →
F250
ASCII
conversion
ASCII → binary
F251
data conversion
F252 ASCII data
check
Character strings instructions
F257 Comparing
P257 character
strings
F258 Character string
P258 coupling
F259 Number of
P259 characters in a
character string
F260 Search for
P260 character string
F261 Retrieving data
P261 from character
strings (right
side)
F262 Retrieving data
P262 from character
strings (left
side)
F263 Retrieving a
P263 character string
from a character
string
F264 Writing a
P264 character string
to a character
string
F265 Replacing
P265 character
strings
: Available, : Not available,
*1) This instruction is available for FPΣ 32k type.
*2) This instruction is available for FPΣ Ver. 3.10 or later.
*3) This instruction is only available for FP-X Ver.2.0 or later.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Ope-
Boolean
rand
S, D Converts the 16-bit binary data of
GRY
"S" to gray codes, and the
PGRY
converted result is stored in the "D".
S, D Converts the 32-bit binary data of
DGRY
(S+1, S) to gray code, and the
PDGRY
converted result is stored in the
(D+1, D).
S, D Converts the gray codes of "S" to
GBIN
binary data, and the converted
PGBIN
result is stored in the "D".
S, D Converts the gray codes of (S+1, S)
DGBIN
to binary data, and the converted
PDGBIN
result is stored in the (D+1, D).
S, n, The values of bits 0 to 15 of "S" are
COLM
D stored in bit "n" of (D to DC+15).
PCOLM
S, n, The values of bit "n" of (S) to (S+15)
LINE
D are stored in bits 0 to 15 of "D".
PLINE
S1, Converts multiple binary data to
BTOA
S2, n, multiple ASCII data.
D
S1, Converts multiple ASCII data to
ATOB
S2, n, multiple binary data.
D
S1, Checks the ASCII data strings to be
ACHK
S2, n used in F251 (ATOB) instruction.
S1, These instructions compare two
SCMP
S2 specified character strings an d
output the judgment results to a
special internal relay.
S1, These instructions couple one
SADD
S2, D character string with another.
S, D These instructions determine the
LEN
number of characters in a character
string.
S1, The specified character is searched
SSRC
S2, D in a character string.
S1, These instructions retrieve a
RIGHT
S2, D specified number of characters from
the right side of the character string.
S1, These instructions retrieve a
LEFT
S2, D specified number of characters from
the left side of the character string.
S1, These instructions retrieve a
MIDR
S2, character string consisting of a
S3, D specified number of characters from
the specified position in the
character string.
S1, These instructions write a specified
MIDW
S2, D, number of characters from a
n character string to a specified
position in the character string.
S, D, A specified number of characters in
SREP
p, n a character string are rewritten,
starting from a specified position in
the character string.
: Not available partially
Description
12
12
10
10
12
10
10
12
12
6
8
6
8
8
8
*1
*1
*2 *3
6
8
8