Panasonic AFPX-C30R User Manual page 471

WR903 FP-X
Address
R9030 Not used
R9031 Not used
R9032 COM1 port mode flag
R9033 PR instruction flag
Editing in RUN mode
R9034
flag
R9035 Not used
R9036 Not used
COM1 port
R9037 communication error
flag
COM1 port reception
done flag during
R9038
general- purpose serial
communication
COM1 port transmission
done flag during
R9039
general-purpose serial
communication
R903A Not used
R903B Not used
R903C Not used
R903D Not used
TOOL port reception
R903E done flag during general
purpose communication
TOOL port transmission
done flag during
R903F
general-purpose serial
communication
Note) R9030 to R903F can be changed during 1 scan.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Name
-
-
Turns on when the general-purpose communication
-
function is being used
Goes off when any function other than the general-
-
purpose communication function is being used.
Off: Printing is not executed.
On: Execution is in progress.
Goes on for only the first scan following completion of a
rewrite during the RUN operation.
-
-
Goes on if a transmission error occurs during data
-
communication.
Goes off when a request is made to send data, using the
-
F159 (MTRN) instruction.
Turns on when the terminator is received during general -
-
purpose serial communication.
Goes on when transmission has been completed in
-
general-purpose serial communication.
Goes off when transmission is requested in general-
-
purpose serial communication.
-
-
-
-
Turns on when the terminator is received during general -
-
purpose serial communication.
Goes on when transmission has been completed in
-
general-purpose serial communication.
Goes off when transmission is requested in general-
-
purpose serial communication.
Description